57
MULTI
0

123456789

GM Initialize

This command transmits a GM System On message to Multi
mode, resetting all tracks to the GM settings (refer to the
table below).
In Multi mode when a GM System On message is
received from an external device or the tone generator
will be reset to the GM settings in the same way as
when this command is executed (However even in
these cases, the parameters of the 9: MasterFX will not
be reset).

Rename Track

Selects “Rename Track,” access the dialog box and rename
the selected multi. Up to sixteen characters can be input.
(☞OG X50: p.112, microX: p.114)
0–2: Prog..8 (Track Program T01...08)
0–3: Prog..16 (Track Program T09...16)
Indicates the program that will be used by each track.

0–2(3)a: Track Number & Category

Track Number & Category

This shows the track number and the abbreviated name of
the program category.

0–2(3)b: Program Select

Program Select

X50: [A…D 000...127, G...g 001...128: name]

microX: [A…E 000...127, G...g 001...128: name]

In this area you can select the program that will be used by
each track. The lower line shows part of the name of the pro-
gram assigned to the track. For GM2 variation banks or the
GM2 drums bank, the variation bank (1)–(9) or drums bank
(d) will be shown.
Choose this parameter, and use one of the following meth-
ods to select a program.
X50:
• Turn the [VALUE] dial.
•Use the [INC][DEC] buttons.
• Use the numeric buttons [0]–[9] to enter the program
number, and press the [ENTER] button to confirm.
GM Initialize Parameters
Parameter Track1–9, 11–16 Track10
0Program Select G001:Acoustic Piano g(d)001:STANDARD Kit
Pan C064 C064
Volume 100 100
2Status – – The setting remains unchanged
Use Program’s Scale – – The setting remains unchanged
7Arpeggiator Assign – – The setting remains unchanged
Other Arpeggiator parameters – – The setting remains unchanged
8IFX/Indiv.Out BUS Select L/R DKit
Send1(MFX1) 0 0
Send2(MFX2) 40 40
IFX1–5 – – The setting remains unchanged
Pan(CC#8) – – The setting remains unchanged
BUS Select – – The setting remains unchanged
Send1 – – The setting remains unchanged
Send2 – – The setting remains unchanged
Other Insert Effect parameters – – The setting remains unchanged
9MFX1 – – 16: St. Chorus
MFX2 – – 53: Rev Smth. Hall
Return1 – – 127
Return2 – – 050
Other Master Effect and Master EQ parameters – – Default settings
0–2a
0–2b
0–2c