Kramer Electronics RC-81R user manual Operating the RC-8IR, Commands Configuration

Using the RC-8IR Universal Room Controller

6.1Operating the RC-8IR

In the following example1 that is illustrated in Figure 10, the RC-8IRis labeled with specific functions and each button is programmed2 to perform several tasks3 as defined in Table 5.

Each button may be assigned with up to 15 commands.

Table 5: The Commands Configuration

ON OFF

DVD Vol

UP

PC	Vol
	DOWN
VCR	HELP
	DESK

Figure 10: RC-8IR Labels

Setup

The Label		The Macro Sequence
ON	•	Power up the projector
	• Power up the power amplifier
	• Power up the DVD player
	• Power up the video player
	• Roll down the projector screen
	• Turn on the speakers
	• 1 minute delay [for the
		projector to heat up]
	•	Turn lights off
	• The projector selects the PC input
OFF	•	Turn lights on
	• Power down the projector
	• Power down the power amplifier
	• Stop the DVD player
	• Power down the DVD player
	• Stop the video player
	• Power down the video player
	• Roll up the projector screen
	• Turn off the speakers
DVD	•	Stop the video player
	• The projector selects the DVD input
	•	Play the DVD
VCR	•	Stop the DVD
	• The projector selects the VCR input
	•	Play the VCR
PC	•	Stop the DVD
	•	Stop the VCR
	• The projector selects a PC input
Vol UP	•	Power amplifier volume up
Vol DOWN	•	Power amplifier volume down
HELP DESK	•	Call for technical assistance

1 This is only one example among numerous possibilities, each button can be configured as required 2 By the system integrator

3 A macro sequence, including up to 15 commands per button, carried out one after the other

10 KRAMER: SIMPLE CREATIVE TECHNOLOGY