KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
2
Kramer’s RC-8IR one-gang wall plate is a highly versatile controller
interface that acts as an all-in-one extended remote control panel for control
of A/V equipment—especially projectors and associated equipment—in any
room (such as classrooms, boardrooms, or auditoriums). It streamlines
operations and simplifies control by integrating audio, video, and computer-
video sources into a centralized system.
The RC-8IR includes:
• An Ethernet port for configuration and cont rol1
• Configurable backlit buttons
2 to set up any supported3
• Two bidirectional RS-232 wired serial ports, for universal display (for
example, projectors) and switcher control, and one RS-485 serial port
command
• Two relays for the simplified and centralized control of room functions
(such as lighting, closing blinds, scree n settings, and so on)
• Two IR control ports
• An IR-learner for the customized control of external sources, receiving the
IR commands from different remote transmitters without the need for an
external IR remote control unit
• Macro mode operation, for programming up to 15 commands with the
press of a single button, and summing up to a total of 120 commands
• Support for firmware upgrade
To achieve the best performance:
• Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
• Avoid interference from neighboring electrical appliances and position
your Kramer RC-8IR away from moisture, excessive sunlight and dust
1 Of up to five machines with unique IP addresses
2 Six buttons for RC-6IR, and eight buttons for the RC-8IR
3 To be configured by the system integrator only