Kramer Electronics VP-1608 user manual Connecting via an RS-485 Controller

Figure 8: Control Configuration via RS-232 and RS-485

6.2Connecting via an RS-485 Controller

To connect up to seven single VP-1608units via an RS-485 controller, for example, a PC (equipped with an RS-485 interface), do the following:

i	Always switch off the power to each device before connecting it to your
	VP-1608. After connecting your VP-1608, connect its power and then
	switch on the power to each device.

1.Connect the video sources and acceptors, the appropriate audio sources and acceptors, and the power cord to each VP-1608unit.

VP-1608 - Connecting Multiple VP-1608 Units 15