7.3Confirming Settings

Choose to work in the AT ONCE or the CONFIRM mode, as explained in Section 7.3.1. When the VP-1608operates in the AT ONCE mode, pressing an OUT-IN combination implements the switch immediately. In the CONFIRM mode, the TAKE button must be pressed to authorize the switch.

In the AT ONCE mode, you save time as execution is immediate and actions require no user confirmation. However, no protection is offered against changing an action in error.

In the CONFIRM mode:

You can key-in several actions and then confirm them by pressing the TAKE button, to simultaneously activate the multiple switches

Every action requires user confirmation, to protect against erroneous switching

Execution is delayed until the user confirms the action

Failure to press the TAKE button within one minute (the timeout) aborts the action.

7.3.1Toggling between the AT ONCE and CONFIRM Modes

To toggle between the AT ONCE and CONFIRM modes, do the following:

1.Press the TAKE button to toggle from the AT ONCE mode (the TAKE button does not illuminate) to the CONFIRM mode (the TAKE button illuminates). The TAKE button illuminates and actions now require user confirmation.

2.Press the illuminated TAKE button to toggle from the CONFIRM mode back to the AT ONCE mode.

The TAKE button turns off and actions no longer require user confirmation.

VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix

19

Page 23
Image 23
Kramer Electronics VP-1608 user manual Confirming Settings, Toggling between the AT Once and Confirm Modes