Kramer Electronics VP-1608 7.8 Displaying Unit Characteristics

VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balanced Audio Matrix 23
7.7.1 Resetting to the Current Status
You can reset the VP-1608 unit to the current status (reloads the current setup)
To reset a VP-1608 unit to the current status, do the following:
• Press INPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to the current status, momentarily displaying the
unit characteristics, as described in Section 7.8. In addition, the unit
characteristics also appear immediately (and automatically) after switching
on the power
7.7.2 Resetting to the Factory Default State
You can reset the VP-1608 unit to the factory default state.
To reset a VP-1608 unit to the factory default state, do the following:
• Press OUTPUT buttons 1 and 5 simultaneously for 3 seconds
The VP-1608 unit resets to its factory default state, momentarily displaying
the unit characteristics, as described in Section 7.8
7.8 Displaying Unit Characteristics
Switching on and/or resetting to the Current Status (see Section 7.7.1) or to the
Factory Default State (see Section 7.7.2), the VP-1608 unit momentarily displays
the following characteristics on the front panel (as Figure 10 illustrates):
• The number included in the product name (for example, 1608)
• The firmware version number
Figure 10: VP-1608 Unit Characteristics