3 Overview

The VP-160816x8 RGBHV/Balanced Audio Matrix is a true matrix switcher, routing any input to any or all outputs. The VP-1608includes 16 input and 8 output selector buttons.

The unit features:

A bandwidth of 400MHz (fully loaded) for RGB signals

A unique vertical and horizontal sync-pulse solution

Audio-follow-video or audio breakaway option (to switch audio independently from video)

15 preset memory locations for quick access to common configurations

A “TAKE” button for precise switch control, letting you place multiple switches in a queue, and then activate them, with one touch of this button or a single serial command

A delayed switching mode (ranging from 0 to 3.5sec in increments of 0.5sec), for clean transitions when switching between non-genlocked sources

Control the VP-1608using the front panel buttons, or remotely via:

RS-485 or RS-232 serial commands—that also support audio gain adjustments for each input and output—transmitted by a touch screen system, PC, or other serial controller

The Kramer RC-IR3Infrared Remote Control Transmitter

The VP-1608is dependable, rugged and fits into three vertical spaces (3U) of a standard 19" rack.

3.1Defining the VP-1608 16x8 RGBHV/Balanced Audio Matrix

Figure 1 and Figure 2 define the front and rear panels of the VP-1608. Figure 3 defines the switches on the underside.

VP-1608 - Overview

3

Page 7
Image 7
Kramer Electronics user manual Overview, Defining the VP-1608 16x8 RGBHV/Balanced Audio Matrix