18 VP-1608 - Operating Your VP-1608 16x8 RGBHV/Balance d Audio Matrix
7.1.1 Setting the Audio-Follow-Video
To set the audio-follow-video (AFV) option, press the AFV button:
• If the AUDIO and VIDEO configurations are the same, the AFV button
illuminates. The audio follows the video
• If the AUDIO differs from the VIDEO, the TAKE and the AUDIO buttons
flash. Also, the audio outputs in the INPUT STATUS 7-segment display that
are changed, flash (warning that you are about to modify the audio
configuration for AFV operation). Press the TAKE button to confirm the
modification. The audio follows the video
7.1.2 Setting Breakaway
To set the breakaway option:
Press either the AUDIO (for audio control only) or the VIDEO (for video control
only) button:
• If the AUDIO button illuminates, switching operations relate to audio
• If the VIDEO button illuminates, switching operations relate to video
7.2 Switching OUT-IN Combinations To switch a video/audio input to a video/audio output, do the following:
1. Press an OUTPUT SELECTOR button.
The corresponding input number in the INPUT STATUS 7-segment display
flashes.
2. Press an INPUT SELECTOR button.
The selected input switches to the selected output.
For example, press the ALL button and then INPUT SELECTOR button # 2 to
connect input # 2 to all the outputs.