Kuhn Rikon 3100 SPECIFICATIONS 3115 TO, Model - Stationary, 3120, 3125, 3130, 3136, 3142

SPECIFICATIONS 3115 TO 3142

MODEL - STATIONARY	3115	3120	3125	3130	3136	3142
DIMENSIONS (INCHES)
A - Overall Length - with motor mount	113	159	160	184	181	205
B - Overall Height - with rails and scales	64	64	69	69	83	83
C - Overall Width - with magnet tray	89	95	97	97	105	105
D - Height of Discharge - with rails and scales	17	18	19	19	28	28
E - Motor Mount to Center of Discharge Door	50	65	66	66	60	60
F - Overall Width Top Opening	71	78	81-1/2	81/1/2	87	87
G - Overall Length Top Opening	82	120	120	144	132	156
H - Height Reduction - less rails and scales	7	7	6-1/2	6-1/2	10	10
I - Length Reduction - less motor mount	12	36	36	NA
SPECIFICATIONS
Unit Weight 1 - pounds	2,850	4,809	6,489	7,021	8,480	8.762
Mixing Capacity - cubic foot/bushels	147/118	216/174	250/200	300/240	360/288	420/340
Reel Diameter	52”	52”	60”	60”	68”	68”
Reel Drive Shaft Diameter	3”	3-1/2”	3-1/2”	3-1/2”	4”	4”
Reel Arms	3	4	4	4	5	5
Reel Hopper Thickness	3/16”	3/16”	5/16”	5/16”	5/16”	5/16”
Reel Speed RPM	4.37	4.89	4.60	4.60	4.0	4.0
Lower Auger
Flighting Diameter	16”	16”	18”	18”	20”	20”
Flighting Thickness - Sectional	3/8”	3/8”	3/8”	3/8”	1/2”	1/2”
Tube-Outside Diameter	4”	4”	5-9/16”	5-9/16”	5-9/16”	5-9/16”
Drive Shaft Diameter	2”	2-1/2”	2-1/2”	2-1/2”	3”	3”
Upper Auger
Flighting Diameter	14”	14”	18”	18”	20”	20”
Flighting Thickness - Sectional	3/8” - H	3/8” - H	3/8” - H	3/8” - H	1/4” - S	1/4” - S
Tube-Outside Diameter	4”	4”	5-9/16”	5-9/16”	5-9/16”	5-9/16”
Drive Shaft Diameter	2”	2”	2-1/2”	2-1/2”	3”	3”
Auger Hopper Thickness	1/4”	1/4”	5/16”	5/16”	5/16”	5/16”
Side Sheets Thickness	10 ga.	10 ga.	10 ga.	10 ga.	10 ga.	10 ga.
End Sheets Thickness	10 ga.	10 ga.	3/16”	3/16”	3/16”	3/16”
Door Opening Size	20” x 16”	36"x20"	36"x20"	36"x20"	36"x20"	36"x20"
Oil Bath	Front	Front	Front	Front	Rear	Rear
Roller Chain Drive	50-60-80	60H-80-100H	60H-80H-100H	60H-80H-100H	80-100-120	80-100-120
Electric Drive (HP) 2	7-1/2-10	10	10	10-15	15-20	15-25

1 Unit is equipped with most common options.

2 Horsepower requirements vary greatly with different materials. Consult operator s manual for proper motor sizing.

We reserve the right to change any equipment specifications, design, or materials without notice. Contact factory for nonagricultural use or heavier materials. US and foreign patents filed.

SAFETY

FIRST

Always read and understand the Operator s Manual and all Safety Decals before using the equipment.

1501 West 7th Ave., Brodhead, WI 53520

701 Cherry Ave., Greeley, CO 80632