Option 6-7
Network Interface Card (IB-23)
The network interface card supports TCP/IP, IPX/SPX, NetBEUI and
AppleTalk protocols, so that the printer can be used on network
environments including Windows, Macintosh, UNIX, NetWare, etc.
The network interface card must be installed in the option interface slot
that is located at the back of the printer.
1Turn off the printer and disconnect the power cord and printer cable.
2Open the rear cover.
3Remove the optional interface slot cover.
4Insert the Network Interface Card and secure it with the screws
removed in step 3.
5Close the rear cover, and connect the printer cable.
6Connect the power cord, and turn on the printer.
7Configure the network address from Quick Setup. For more
information, refer to Operation Guide of the network card.