LANCOM 7111 VPN – LANCOM 8011 VPN
Chapter 2: Installation
Flashing Power LED but no connection?
There's no need to worry if the Power LED blinks red and you can no longer connect to the WAN. This simply indicates that a preset time or
Reset connect charge protection. Increase the limit that has been reached.
Completely deactivate the lock that has been triggered (set limit to '0').
LANCOM 
Systems
Power
Signal for reached time or
EN
If a time or connect charge limit has been reached, you will be notified in LANmonitor. To reset the connect charge protection, select Reset Charge and Time Limits in the context menu (right mouse click). You can configure the connect charge settings in LANconfig under Management Costs (you will only be able to access this configuration if 'Complete con- figuration display' is selected under View Options…).
You will find the connect charge protection reset in WEBconfig and all parameters under Expert Configuration Setup
VPN | VPN connection status |
|
| ||
| off |
|
|
| No VPN channel established |
|
|
|
| ||
|
|
|
|
|
|
| green |
| blinking |
| Connection established |
|
|
|
|
|
|
| green |
| flashing |
| First connection |
|
|
|
|
|
|
| green |
| inverse flashing |
| Further connections |
|
|
|
|
|
|
| green |
| constantly on |
| VPN channel is established |
Security | Status of the Firewall. Shows the state of security settings and blocked attacks | ||||
| on the secured network. |
|
| ||
| green |
| constantly on |
| Security settings are okay. Rules for filtering packets are |
|
|
| |||
|
|
|
|
| established |
|
|
|
|
|
|
| red/ |
| blinking |
| Insecure configuration |
| green |
|
|
|
|
|
|
|
|
|
|
| red |
| flickering |
| Security alarm: filtering packets with Firewall rules |
|
|
|
|
|
|
21
