Lancom Systems 7111 VPN Settings for NetBIOS routing, Providing dial- up access, User SAMPLE

LANCOM 7111 VPN – LANCOM 8011 VPN

Chapter 6: Providing dial- up access

IPX internal net: 00020002

WAN

IPX network no.: Remote

00000009workstation

VPN or ISDN

connection ISDN adapter

(0123) 123456	User: 'SAMPLE'
LAN of the head office	(0123) 777888
IPX network no.: 00000001, Binding: Ethernet_II

The required network numbers are designated as “External Network Num- bers”. Like IP network addresses, they apply to an entire LAN segment. On the other hand, internal IPX numbers are used to address specific Novell servers in the LAN. All three specified network numbers must be distinct from one another and from all used internal IPX network numbers.

In addition, it may be necessary to enter the frame type (“binding”).

Specifying the IPX network number and binding used is not necessary if the remote network also contains a Novell server. A network number for the WAN must also be entered manually in this case, however.

6.1.4Settings for NetBIOS routing

All that is required to use NetBIOS is the name of a Windows workgroup from the router's own LAN.

The connection is not established automatically. The RAS user must manually establish a connection to the LANCOM router via Dial-Up Networking first. When connected, they can search for and access computers in the remote network (via Find Computers, not through the Network Neighbourhood).

EN

53