Land Pride | Table of Contents |
Section 2: Operating Instructions
Seed Level Indicator
Be sure your Seed Level Indicator is adjusted so the foam float will be above the see box rim with box lid open to allow for filling the box, and the gauge will show empty
(E) with the box lid closed, refer to Figure
13279 |
Seed Level Indicator
Figure
Agitator Attachment (Optional)
General Operating Instructions
1.The Agitator Attachment can be effective:
a.for large, fluffy,
b.if uneven seeding occurs because of bridging in the seed box.
2.When using the agitator, move the seed broadcasting handle to the left, see “Seed Broadcasting System” on page 18. In doing so, the seed will have a larger area to fall through to avoid plugging.
3.A large amount of stems or leaves mixed in with the seeds can cause bridging in the feed cups. Always use clean seeds if possible.
4.It will be necessary to calibrate your seed rate after connecting the agitator. See “Calibrating & Adjusting Seeding Rate” on page 20 for detailed instructions. While running the calibration, check to make sure the seed is not bridging in the feed cups.
NOTE: If you are not seeding large, fluffy seeds, or the agitator is not needed to eliminate bridging, the agitator sprocket should be disconnected. Failure to do so will shorten the chain life.
8/21/06 | PS25120 Primary Seeder |
