Table of Contents

Important Safety Information

Safety Labels

Your Primary Seeder comes equipped with all safety labels in place. They were designed to help you safely operate your implement. Read and follow their directions.

1.Keep all safety labels clean and legible.

2.Replace all damaged or missing labels. To order new labels go to your nearest Land Pride dealer or visit our dealer locator at landpride.com.

3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as

specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request.

4.Refer to this section for proper label placement. To install new labels:

a.Clean the area the label is to be placed.

b.Spray soapy water on the surface where the label is to be placed.

c.Peel backing from label. Press firmly onto the surface.

d.Squeeze out air bubbles with the edge of a credit card.

818-003C

Slow Moving Vehicle Label

(also found on Small Seeds Attachment)

12790

818-230C

18938

Red Reflector

 

 

 

 

818-230C

 

 

 

 

Red Reflector

 

 

 

12788

(also found on Walkboard)

 

 

 

 

4

PS25120 Primary Seeder

313-156M

 

8/21/06

Page 6
Image 6
Land Pride PS25120 manual 818-003C, 818-230C