Land Pride

Table of Contents

Section 1 Assembly and Setup

Single Tailwheel Assembly

NOTE: Do not tighten hardware until assembly is complete. Refer to “Torque Values Chart for Common Bolt Sizes” on page 27.

Refer to Figure 1-3:

1.Slide tailwheel arm adjustment plate (#10) onto tailwheel arm weldment (#1) as shown.

2.Attach tailwheel tube (#1) to deck using a

5/8” -11 x 3” long bolt (#2), 5/8” lock washer (#3), and 5/8” nut (#4).

NOTE: Install in hole shown if chainguards are installed, otherwise move components to hole closest to gearbox.

3.Assemble tailwheel mounting bracket (#5), and (#6) to deck with four 1/2” -13 x 1 1/2” long carriage bolts (#7), 1/2” flat washers (#8), and 1/2” lock nuts (#9).

4.Install shim washer (#14) onto yoke assembly (#15) then insert into tailwheel weldment (#1). Slide shim washer (#14) onto yoke assembly shaft and secure with roll pin (#16).

5.Assemble tailwheel adjusting bracket (#10), to mount- ing brackets (#5), and (#6) with two 1/2” -13 x 1 1/2” long bolts (#11), 1/2” lock washers (#12), and 1/2” nuts (#13). Refer to “Cutting Height Adjustment” on page 17.

Dual Tailwheel Assembly

NOTE: Do not tighten hardware until assembly is complete. Refer to “Torque Values Chart for Common Bolt Sizes” on page 27.

Refer to Figure 1-4:

1.Attach tailwheel weldment (#1) to tailwheel bracket weldment (#2) with a 5/8” -11 x 3” long bolt (#3), 5/8” lock washer (#4), and 5/8” nut (#5).

NOTE: Install in hole shown if chainguards are in- stalled, otherwise move components to hole clos- est to gearbox.

2.Assemble tailwheel adjusting bracket (#6), and (#7) to the deck using four 1/2” -13 x 1 1/2” long carriage bolts (#8), and 1/2” lock nuts (#9) and 1/2” flat washers (#17).

3.Install shim washer (#10) onto yoke assembly (#11) then insert into tailwheel weldment (#1). Slide shim washer (#10) onto yoke assembly shaft and secure with roll pin (#12).

4.Install two 1/2” -13 x 3 1/2” long bolts (#14), lock wash- ers (#15), and nuts (#16), in adjusting mounts

(#6 & #7). Refer to “Cutting Height Adjustment” on page 18. Repeat for opposite side.

 

14384

Single Tailwheel Assembly

14385

Dual Tailwheel Assembly

Figure 1-3

 

Figure 1-4

7/14/08

RCR2584 Rotary Cutter 312-459M

9

Page 11
Image 11
Land Pride RCR2584 manual Single Tailwheel Assembly, Dual Tailwheel Assembly

RCR2584 specifications

The Land Pride RCR2584 is a robust rotary cutter designed for heavy-duty applications, making it an essential tool for landowners, farmers, and landscapers alike. This rotary cutter is known for its ability to effortlessly tackle thick vegetation, ensuring that properties remain well-maintained and aesthetically pleasing. One of its main features is its cutting width of 84 inches, allowing users to cover large areas in a single pass, thereby saving both time and effort during land management tasks.

Equipped with a powerful gear-driven transmission, the RCR2584 exhibits exceptional durability and strength. This feature is crucial for cutting through tough brush and overgrown grass, as it provides reliable performance even under challenging conditions. The design of the cutter includes a heavy-duty, reinforced frame, which contributes to its robust construction, ensuring that it can withstand the rigors of daily use without compromising performance or safety.

The deck of the RCR2584 features a smooth underside, which prevents grass buildup and enhances the cutter's cutting efficiency. Additionally, this rotary cutter boasts a dual-blade design, allowing for cleaner cuts and improved mulching capabilities. The heavy-duty blade mounts add to the overall durability of the system, ensuring that the blades maintain their position while cutting through dense materials.

For enhanced stability, the RCR2584 includes side skids, which help adjust the cutting height and ensure a smooth, even result across varied terrain. Operators can easily adjust the cutting height as needed, making the cutter versatile for different environments and mowing conditions. Furthermore, the solid 3-point hitch design secures the cutter to tractors, providing a safe and stable connection.

In terms of safety features, the RCR2584 incorporates chain shields that help contain debris, reducing the risk of projectiles while operating. The heavy-duty construction of this rotary cutter not only ensures longevity but also provides peace of mind for operators concerned about safety.

The Land Pride RCR2584 rotary cutter is truly a top-tier solution for those needing reliable land management tools. Its impressive features, advanced technology, and sturdy design make it a valuable investment for maintaining properties and managing landscapes effectively. With this cutter in your arsenal, you can conquer the toughest jobs with confidence.