Table of Contents

Section 1 Assembly and Setup

Land Pride

Safety Chains

Refer to Figure 1-12:

When towing implements on the highway, use a safety chain with tensile strength equal to or greater than the gross weight of the implement to be towed by the tractor. This will control the implement in the event the hitch pin is lost. After attaching the safety chain (#4), make a trial run by driving the tractor to the right and to the left for a short distance to check the safety chain adjustment. If neces- sary, re-adjust to eliminate a tight or loose chain.

See (ASAE S338.2) for proper connection between tractor and implement.

Check Chains

Check chains are used to control cutting height and allow mower to be lowered to the same preset cutting height ef-

fortlessly. Install lower end of check chain (#1) to inner hitch ear as shown in Figure 1-13, using bolts (#2), lock washers (#3) and nuts (#4). Tighten securely. Install chain lugs (#5) on either side of the tractor top link mount using pin (not supplied)

(1” Dia. pin for Category II and 1 1/4” for Category III). Cut- ting height is then set by placing proper chain link in key slot (#5).

NOTE: For additional safety in transport, raise cut- ter as high as possible, and shorten check chains to prevent inadvertent falling in transport.

14617

Check Chain Assembly

Figure 1-13

14 RCR2584 Rotary Cutter 312-459M

7/14/08

Page 16
Image 16
Land Pride RCR2584 manual Safety Chains, Check Chains

RCR2584 specifications

The Land Pride RCR2584 is a robust rotary cutter designed for heavy-duty applications, making it an essential tool for landowners, farmers, and landscapers alike. This rotary cutter is known for its ability to effortlessly tackle thick vegetation, ensuring that properties remain well-maintained and aesthetically pleasing. One of its main features is its cutting width of 84 inches, allowing users to cover large areas in a single pass, thereby saving both time and effort during land management tasks.

Equipped with a powerful gear-driven transmission, the RCR2584 exhibits exceptional durability and strength. This feature is crucial for cutting through tough brush and overgrown grass, as it provides reliable performance even under challenging conditions. The design of the cutter includes a heavy-duty, reinforced frame, which contributes to its robust construction, ensuring that it can withstand the rigors of daily use without compromising performance or safety.

The deck of the RCR2584 features a smooth underside, which prevents grass buildup and enhances the cutter's cutting efficiency. Additionally, this rotary cutter boasts a dual-blade design, allowing for cleaner cuts and improved mulching capabilities. The heavy-duty blade mounts add to the overall durability of the system, ensuring that the blades maintain their position while cutting through dense materials.

For enhanced stability, the RCR2584 includes side skids, which help adjust the cutting height and ensure a smooth, even result across varied terrain. Operators can easily adjust the cutting height as needed, making the cutter versatile for different environments and mowing conditions. Furthermore, the solid 3-point hitch design secures the cutter to tractors, providing a safe and stable connection.

In terms of safety features, the RCR2584 incorporates chain shields that help contain debris, reducing the risk of projectiles while operating. The heavy-duty construction of this rotary cutter not only ensures longevity but also provides peace of mind for operators concerned about safety.

The Land Pride RCR2584 rotary cutter is truly a top-tier solution for those needing reliable land management tools. Its impressive features, advanced technology, and sturdy design make it a valuable investment for maintaining properties and managing landscapes effectively. With this cutter in your arsenal, you can conquer the toughest jobs with confidence.