Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not allow anyone to stand

between the tractor and

implement while backing up to the

implement.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

▲ Do not carry passengers on

implement at any time.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

1/07/09

SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M

1

Page 2 Page 4
Page 3
Image 3
Land Pride SC2672, SC2660 manual Safety at All Times
Page 2 Page 4

SC2672, SC2660 specifications

The Land Pride SC2660 and SC2672 are exceptional tillers designed to enhance agricultural productivity through their advanced features and technologies. These models are tailored for small to medium-sized tractors, making them versatile choices for hobby farmers and professionals alike.

One of the standout characteristics of the SC2660 and SC2672 is their robust construction. Built with high-quality materials, these tillers ensure durability and longevity, allowing them to withstand the rigors of demanding soil conditions. The two models differ primarily in width, with the SC2660 featuring a 60-inch working width, while the SC2672 offers a slightly wider 72-inch option, catering to various land preparation needs.

Both tillers are equipped with heavy-duty tines made from hardened steel, providing excellent soil penetration and thorough tilling action. The tines are designed to break up compacted soil effectively, promoting better aeration and root growth for crops. The adjustable tilling depth feature allows operators to customize the tilling process to meet specific agricultural requirements, ensuring optimal soil health and structure.

The SC2660 and SC2672 incorporate a chain drive system that delivers reliable power from the tractor to the tiller. This efficient drive mechanism reduces wear and enhances the tillers' overall performance, ensuring a smooth operation even under challenging conditions. The adjustable side skids provide further flexibility, allowing users to control the width of the tilling area, which is particularly beneficial for row cropping applications.

Another important aspect of these tillers is their ease of use. The quick-hitch compatibility allows for fast attachment and detachment, saving valuable time in the field. Additionally, the low maintenance requirements and straightforward design mean that operators can focus more on tilling and less on equipment upkeep.

In summary, the Land Pride SC2660 and SC2672 tillers offer a blend of strength, efficiency, and ease of use. Their durable build, adjustable features, and reliable performance make them an indispensable tool for any agricultural operation. Whether you're preparing your garden or cultivating larger fields, these tillers provide the versatility and reliability needed to achieve outstanding results.
Top Page Image Contents