Land Pride SC2672, SC2660 manual Hitch Hook-Up, Hydraulic Hose Hook-up, Danger, Table of Contents

Land Pride Table of Contents

Section 1: Assembly & Set-up

Hitch Hook-Up

Refer to Figure 1-5:

!CAUTION

Do not stand between Skid Steer loader and implement during hookup.

1.Make sure hydraulic hoses and height adjustment safety chain do not interfere with hitch hook-up.

2.Drive Skid Steer slowly to the Rotary Cutter making sure the front hitch plate of the Skid Steer is parallel with the Rotary Cutter hitch.

3.Tilt top of Skid Steer hitch plate slightly forward.

4.Place top of Skid Steer hitch plate under the Rotary Cutter top angle bar.

5.Slowly lift Skid Steer’s hitch until Rotary Cutter’s hitch and Skid Steer’s top angle bar have come together.

6.Push lock handles of the Skid Steer down so that the pins go through the bottom slots of the Rotary Cutter’s hitch and the handles lock down.

7.Loop height adjustment safety chain forward down and under 2" x 3" tube and then attach to Skid Steer’s lower hitch loop. See “Height Adjustment Safety Chain” on page 15.

Hydraulic Hose Hook-up

Refer to Figure 1-5:

Two high pressure hydraulic outlets are required for the hydraulic motor hoses and one outlet for the case drain hose.

!DANGER

Hydraulic fluid under pressure can penetrate skin. Wear protective gloves and safety glasses or goggles when working with hydraulic systems. Use a piece of cardboard or wood rather than hands when searching for hydraulic leaks. If hydraulic fluid is injected into the skin, it must be treated by a doctor within a few hours or gangrene may result.

1.Remove plastic cap from case drain hose and attach hydraulic coupler (supplied by customer) to the hose.

2.Connect case drain hose to reservoir outlet.

3.Connect male and female couplers on the hydraulic motor hoses to the Skid Steer high pressure outlets.

4.Operate skid steer to check blade rotation. Cutter blades should rotate clockwise when looking at the blades from above. If cutter blades are rotating counterclockwise, switch male and female couplers and reconnect to skid steer outlets.

		Case Drain Line
	Clockwise
	Blade Rotation
		Male Coupler
		Top Angle Bar
		Bottom Slots
		Female Coupler
	Rear Skid Shoe	Height Adjustment Safety Chain
24538		(Attach to Skid Steer’s lower hitch loop.)

Skid Steer Hook--Up

Figure 1-5

1/07/09 SC2660 & SC2672 Skid Steer Rotary Cutter 326-025M 11