SETTING THE ENDING DATE OF DAYLIGHT SAVING TIME
Example: Daylight saving time ends on Sunday, October 28, 2001.
Year | Month | Date |
Step 1
SELECT
SELECT
SELECT
SELECT
D.S.T.
END
CHANGE 
SET
D.S.T.
END
CHANGE 
SET
D.S.T.
END
CHANGE 
SET
D.S.T.
END
CHANGE 
SET
Press the SELECT button and position the "
" mark at the "D.S.T. END".
At that moment, the "Year" flashes. (The flashing means it can be changed.)
Change the "Year".
In case of the example, press the CHANGE button to set at "01". And then press the SET button.
At that moment, the flashing changes from "Year" to "Month".
Step 2
Change the "Month".
Press the CHANGE button to set at "10". And then press the SET button.
At that moment, the flashing changes from "Month" to "Date".
Step 3
Change the "Date".
Press the CHANGE button to set at "28". And then press the SET button.
Step 4
After you finish setting the ending date of D.S.T., press the SET button once again. Now the ending date of D.S.T. setting has been completed. Replace the cover and lock.
IMPORTANT: If you do not complete Step 4, the clock will not print.
17
