HOW TO PROGRAM THE CLOCK

To enter the program setting mode, you should plug the AC adapter into the AC outlet and remove the cover. Thereafter press the SELECT button once. Then the clock goes into the program mode showing the " " on the display positioned at the "TIME".

Program modes

Control buttons

Function of 3 control buttons

SELECT : You can select the desired program setting mode by pressing this SELECT button. Selected program setting mode is indicated by the " " mark on the display.

CHANGE : When you press the CHANGE button, you can increment the set value.

SET : You can set the value selected on the display by pressing the SET button. Thereafter you press this SET button again, you can return the clock to the normal operation mode.

4

Page 6
Image 6
Lathem 1000E manual HOW to Program the Clock, Function of 3 control buttons