Lathem 24A715, 24A715M Mounting the Master Clock

Optional equipment (ordered separately from Lathem):

•Connection cable if the power supply relay PCB is up to 8 feet (2.4 m) from the display unit

•Lathem MasterLink programming software to control the master clock from a PC

•Standalone modem

•Remote schedule selector switch

Mounting the Master Clock

The master clock is shipped ready to surface mount on a wall. It can also be semi-flush mounted with the power supply recessed into the wall, or installed in a standard 19-inch (48.3 cm) rack. See Figure 1-1for wall mount assembly parts. The display unit can also be hung on the wall with the power supply hidden in the floor or ceiling; contact Lathem for details.

A qualified technician should install the master clock. The installation does not require any special tools, but may require extra hardware, wire, or other materials as required by local electrical codes.

Power Supply Backbox

Side Screw Hole

Display Unit

Wall Mount Plate

Figure 1-1

Master Clock Wall-Mount Assembly Parts

1-2 24A715/24A715M Master Clock Installation Manual