Wiring the 12 Volt AC Out Terminals

The 12 Volt AC Out Terminals connect to a non-regulated 12V 250mA power source and are used with the optional remote schedule selector (available from Lathem) when in close proximity to the master clock. Contact Lathem Time Corporation for details.

—WARNING—

This circuit is not fused separately.

Attaching devices with a higher current load may damage the master clock.

Strain Relief for the Communications Cable

Attach the two wire tie wraps included in the installation kit to the terminal block as shown to provide strain relief to the communications cable. Use any two empty positions.

Figure C-10

Example of Cable Strain Relief

24A715/24A715M Master Clock Installation Manual

C-7