Manually Activating Bell Controls

Use the [3]=MANUAL BELL CTRL function to test the bell circuits.

This function does not require a password. Follow the key sequences below:

Press Display

[#]SELECT FUNCTION CODE

[3][3]=MANUAL BELL CTRL

[#]MANUAL BELL CONTROLS

 

1-2-3-4-5-6-7-8

 

PRESS AND HOLD [#]

 

TO EXECUTE. [*] TO END

[1]...[8]

Enter the circuit numbers to be tested, then press and hold [#]. Those

 

circuits will turn on their relays, as shown by the green panel lights,

 

and the bells connected to the activated circuits will sound. When you

 

release the [#], the circuits will turn off their relays. Either choose and

 

test other circuits, or press [*] to quit.

 

Note:

 

Only circuits configured as bell zones will appear. Circuits 5–8 will

 

not appear if the master clock has been programmed to use these

 

relays for control of secondary clocks.

[*]Return to time and date display (clock mode).

2-6

24A715/24A715M Master Clock Installation Manual