Wi-Fi/NFC

Operating the camera using a smartphone

●●You can register up to 20 smartphones. If the number exceeds 20, registrations will be deleted starting from the smartphone touched first.

●●If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted. ●●If the communication environment is bad, the NFC function may not be usable. ●●If there is not a response immediately, shift the position slightly.

●●Do not bump your smartphone strongly against the camera.

●●See the instructions of your NFC-compatible smartphone for more information about smartphone operation and settings.

●●Metal objects between the camera and the smartphone may interfere with communication. Also, any stickers, etc., near the NFC area may affect communication performance.

●●You can still connect to the smartphone even if the camera is turned off. The camera lens may extend when the power is turned on after making a connection. Be careful that the movement does not cause the camera to drop.

●●The NFC function cannot be used in the following cases: ••When connected to a television, computer, or printer ••When recording motion pictures

••During motion picture playback, during slide shows, and during panorama playback (including pauses in each case)

••While sending pictures by Wi-Fi

••While recording still pictures (during self-timer countdown) ••While editing

••When the [Airplane Mode] is [ON]

●●After “Leica C Image Shuttle” is forced to end or after the connection has been canceled, it is necessary to hold the smartphone close to the camera again.

Taking pictures via a smartphone/tablet (remote recording)

Connect to a smartphone (→175)

Select [  ] from “Leica C Image Shuttle”

••The recorded images are saved in the camera. ••Motion pictures can also be recorded.

••Some settings are not available.

••When the camera is in [Panorama Shot] mode or when [Scene Mode] is set to [3D Photo Mode], recording will be in [Program AE] mode.

••The screen differs depending on the operating system.

- 179 -