Wi-Fi/NFC

Operating the camera using a smartphone

Select [Via Network] or [Direct] to connect (→190)

(On your smartphone)

●●When connecting with [Via Network] Set the Wi-Fi function to “ON”

Select a wireless access point, and set

Start “Leica C Image Shuttle”∗ (→174)

●●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]

Start “Leica C Image Shuttle”∗ (→174)

●●When connecting with [Manual Connection] in [Direct]

Set the Wi-Fi function to “ON”

Select the SSID that matches the one displayed on the screen of the camera, and then enter the password

Start “Leica C Image Shuttle”∗ (→174)

∗A window indicating that the smartphone is connecting to the camera is displayed. Press the “Back” button on Android devices / Select “Close” on iOS devices

Select the device you wish to connect to

••When the connection is established, the screen is displayed. To change the send setting: Press the [DISP] button (→199)

Select [SINGLE] or [MULTI]

••To change the setting or disconnect: Press the [WIFI] button (→171)

■■When [SINGLE] is selected

Select the picture

Select [Set]

■■When [MULTI] is selected

Select the picture (repeat)

••If selected again, the setting will be canceled. Select [OK]

••The number of pictures that can be sent by [MULTI] is limited.

••A confirmation screen is displayed. If you select [Yes], the operation is executed.

- 189 -