5.Operation
5.4 Adjusting the clearance angle
57 |
51 |
58 |
Enlarged detail: |
Index marks for |
adjusting the |
clearance angle. |
59.1 |
59.2 |
71 |
Fig. 23
•The index marks (0 °, 5 ° and 10 °) for adjust- ment of the clearance angle (59.1) are located on the right side of the knife holder (57).
•There is also an index mark (59.2) on the right side of the knife holder basis (51) which serves as a reference point when adjusting the clearance angle.
•Loosen the screw (58) using an Allen key size 4 (71) until the knife holder (57) can be moved.
•Move the knife holder until the index mark of the desired clearance angle coincides with the reference line on the knife holder base.
Example:
Enlarged detail showing a clearance angle setting of 5°.
The recommended clearance angle setting for knife holder E is approx. 5°.
•Hold down the knife holder in this position and retighten the screw (58) for clamping.
32 | Instruction manual V 1.4 – 02/2007 |
