2. Safety
Warnings – Working at the instrument
•Take care when handling microtome knives and disposable blades. The cutting edge is extremely sharp and can cause severe injury!
•Always remove the knife / blade before detaching the knife holder from the instrument. Always put the knives back into the knife case when not in use!
•Never place a knife anywhere with the cutting edge facing upwards and never try to catch a falling knife!
•Always clamp the specimen block BEFORE clamping the knife or blade.
•Lock the handwheel and cover the knife edge with the knife guard prior to any manipulation of knife or specimen clamp, prior to changing the specimen block and during all work breaks!
•ALWAYS turn the handwheel clockwise; otherwise, the brake will not work properly.
•Always take appropriate safety precautions when sectioning brittle specimens! Specimen may splinter!
•Ensure that liquids do not enter the interior of the instrument during work!
•Do not attempt to clamp, approach or orient the specimen during the retraction phase.
If a block is oriented during retraction, prior to the next section the block will advance by the retraction value PLUS the selected section thickness. This involves the risk that the specimen collides with the knife/blade!
Warnings – Cleaning and maintenance
•Only authorized and qualified service personnel may access the internal components of the instrument for service and repair!
•Before each cleaning, switch off the instrument, disconnect the power plug, remove the knife holder completely and clean it separately.
Always remove the knife / blade before detaching the knife holder from the instrument.
•Lock the handwheel before each cleaning!
•Do not use any solvents containing acetone or xylene for cleaning!
•Ensure that no liquids enter the interior of the instrument when cleaning!
•Do not turn the instrument on before it is completely dry!
•When using detergents please comply with the safety precautions of the manufacturer.
•Turn the instrument off with the mains switch and pull the mains plug, before replacing the fuses! Only use fuses of the same specification! For fuse specifications, refer to chapter 3.3 – "Technical data".
Leica RM2245 | 9 |
