Lenovo 1047, 1046, 1045, 1048 manual Submenu under the Intel VT-d Configuration

Table 18. Submenus under the IPMI 2.0 Configuration (continued)

Item	Sub-item		Option		Description
BMC Watch Dog Timer		[Disabled] / Reset System /			Disable or enable the OS
Action		Power Down / Power Cycle			based dongle. If enabled,
					whenever any problems
					arising from the operation
					system, such as the
					system halted, the system
					management feature will
					take actions of Reset
					System, Power Down, or
					Power Cycle at the prompt
					of the dongle Timer.
BMC Alert LED and Beep		[Off] / On			Turn on or turn off the BMC
					alert LED and beep.
FW key		[0000000]
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 19. Submenu under the Intel VT-d Configuration
Item	Option				Description
Intel VT-d	Disabled / [Enabled]			Enable or disable the virtualization
				technology for I/O devices.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 20. Submenus under the Remote Access Configuration
Item	Option				Description
Remote Access	[Disabled] / Enabled			Enable or disable the serial port
				remote access.
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 21. Items under the PCIPnP menu
Item	Option				Description
Clear NVRAM	[No] / Yes			If this option is set to Yes, that means
				to clear the NVRAM information when
				the system starts up.
Boots Graphic Adapter Priority	[Auto] / Onboard VGA			If this option is set to Auto, the
				external graphics card will be enabled
				firstly. If no external graphics card,
				the integrated graphics controller is
				automatically enabled. If this option
				is set to Onboard VGA, only the
				integrated graphics card is enabled.
LAN1	[Auto] / Enabled / Disabled			The Auto option means to
				automatically enable the integrated
				Ethernet controller 1. The Enabled
				option means to enable the integrated
				Ethernet controller 1. The Disabled
				option means to disable the integrated
				Ethernet controller 1.

Chapter 6. Configuring the server 81