Lenovo 1046, 1047, 1045, 1048 manual RAID controllers, Setting, changing, or deleting a password

•Not be a common word or a common name

•Be significantly different from your previous passwords

Setting, changing, or deleting a password

This section provides instructions on how to set, change, or delete a password.

To set, change, or delete a password, do the following:

1.Start the Setup Utility program. See “Starting the Setup Utility program” on page 76.

2.From the Setup Utility program main menu, select Security ➙ Change Supervisor Password or Change User Password.

3.Follow the instructions on the screen to set, change, or delete a password.

Note: A password can be any combination of up to 6 (1 to 6) alphabetic and numeric characters. For more information, see “Password considerations” on page 83.

RAID controllers

The following table lists the various utilities available to configure RAID controllers before an operating system is installed.

Table 25. RAID utilities

RAID utilities		Description	Location	Where to find more information
EasyStartup	•	For use with all	ThinkServer	“Using the ThinkServer
		factory-supported RAID	EasyStartup DVD	EasyStartup program” on
		controllers		page 85
	•	Automatically detects
		hardware and lists
		all supported RAID
		configurations
	•	Configures one disk array
		per controller using all drives
		currently attached to the
		controller
	• Created a RAID response file
		that can be used to configure
		RAID controllers on similarly
		configured Lenovo servers.
LSI IR-RAID Utility	Onboard 1068E SAS RAID		Press Ctrl+C to start	“Onboard 1068E SAS RAID
	controller			controller Configuration Utility
				program” on page 87
LSI MegaRAID	ThinkServer 8708ELP SAS RAID		Press Ctrl+H to start	Refer to the MegaRAID SAS
WebBIOS	adapter, ThinkServer 8708EM2			Software User Guide on the
Configuration Utility	RAID Adapter, or ThinkServer			documentation DVD that came
	RAID 700 Adapter (9260-8i)			with you server. And you can
				find and install the MegaCLI
				program and the MegaRAID
				Storage Manager program in the
				ThinkServer EasyStartup DVD
				that came with your server. Insert
				the DVD into the optical drive
				and the files are in the \Tools And
				Utilities directory.

84ThinkServer User Guide