Lenovo 3259AD9, 336655U manual Audio problems, Click Start Control Panel Click Hardware and Sound

Audio problems

•Problem: Wave or MIDI sound does not play correctly.

Solution: Make sure that the built-in audio device is configured correctly.

1.Click Start ➙ Control Panel.

2.Click Hardware and Sound.

3.Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

4.Double-clickSound, video and game controllers.

5.Make sure that the following device is enabled and configured correctly:

– Conexant CX20671 SmartAudio HD

•Problem: Recordings made using the microphone input are not loud enough.

Solution: Make sure that the Microphone Boost function is turned on and set by doing the following:

1.Click Start ➙ Control Panel.

2.Click Hardware and Sound.

3.Click Sound.

4.Click the Recording tab in the Sound window.

5.Select Microphone, and click the Properties button.

6.Click the Levels tab, and move the Microphone Boost slider upwards.

7.Click OK.

Note: For details about controlling volume, refer to your Windows online help.

•Problem: A volume or balance slider cannot be moved.

Solution: The slider might be grayed out. This means that its position is fixed by the hardware and cannot be changed.

•Problem: The volume sliders do not stay in place when some audio applications are used.

Solution: It is normal for the sliders to change position when certain sound applications are used. The applications are aware of the settings in the Volume Mixer window and are allowed to change the settings themselves. An example is the Windows Media Player. Usually the application has sliders available

to control the sound from within the application.

•Problem: The balance slider cannot completely mute one channel.

Solution: The control is designed to compensate for minor differences in balance and does not completely mute either channel.

•Problem: There is no volume control for MIDI sound in the Volume Mixer window.

Solution: Use the hardware volume control. This is because the built-in synthesizer software does not support the control.

•Problem: The sound cannot be turned off completely even if you set the Master volume control at minimum.

Solution: You still can hear some sound even though you have set the Master volume control at minimum. To turn off the sound completely, go to the Master volume control and select Mute speakers.

•Problem: When you connect a headphone to your computer while playing sound, a speaker does not produce sound in the MULTI-STREAM mode at SmartAudio.

126User Guide