Lenovo 336655U, 3259AD9 manual Config menu, MAC address Internal LAN

•System board serial number

•Asset Tag

•CPU Type

•CPU Speed

•Installed memory

•UUID

•MAC address (Internal LAN)

Config menu

If you need to change the configuration of your computer, select Config from the ThinkPad Setup program main menu.

The following submenu is displayed:

•Network: Set the LAN related functions.

•USB: Enable or disable USB related functions.

•Keyboard/Mouse: Set the keyboard and the mouse related functions.

•Display: Specify the settings for display output.

•Power: Set power management related functions.

•Beep and Alarm: Enable or disable the audio related functions.

•Serial ATA (SATA): Specify the settings for the hard disk drive.

•CPU: Specify the settings for the CPU.

Notes:

•The default settings are already optimized for you. If you consider changing the computer configuration, proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.

•On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.

The following table shows the contents of the Config menu.

Notes:

•Some items are displayed on the menu only if the computer supports the corresponding features.

•Default values are in boldface.

Table 4. Config menu items

Menu item	Submenu item	Selection		Comments
Network	Wake On LAN	•	Disabled	Enable the system to Power
		•	AC Only	on when the Ethernet
				controller receives a magic
		•	AC and Battery
				packet.
				If you select AC Only, Wake
				On LAN is enabled only
				when ac power adapter is
				attached.
				If you select AC and
				Battery, Wake On LAN is

Chapter 7. Advanced configuration 95