
vDo not bend the disc.
Caring for the CD-RW / DVD-ROM Combination Drive
To protect your
vDo not move the drive when it is in use. Doing so might cause data error or might damage the drive or discs.
vAvoid exposing the drive to the following conditions:
–High humidity
–High temperature
–Excessive dust
–Mechanical vibration
–Sudden shock or dropping
–Placement on an inclined surface
–Direct sunlight
–Sudden temperature changes
vDo not insert foreign objects into the drive.
vDo not stack objects on the drive.
vDo not remove the drive cover or attempt to service the drive.
vRemove any discs from the disc drawer and make sure that the drawer is closed before moving the drive unit.
vKeep the original packing materials. If you need to ship the drive unit to a different location, use the original packing materials to ensure that the drive is transported safely.
Manually ejecting a disc
In case of a power failure, and the drive will not allow the disc to eject, turn off the computer, and straighten a large paper clip to form a tool. The straightened end must extend at least 45 mm (1.8 in.). Insert the extended end into the emergency eject hole on the front of the drive (see “Front view of the drive” on page
45mm
1.8in
Installing software
All of the software for the drive is contained on the User’s Guide and Software CD. The User’s Guide and Software CD contains this User’s Guide, Multimedia Center for Think Offerings, DLA, and Intervideo WinDVD. DLA is installed when you install the Multimedia Center for Think Offerings.
Complete the following procedure to install the software:
1.Insert the User’s Guide and Software CD into the drive. If the CD starts automatically, skip to Step 6.
2.If the CD does not automatically start, click Start, and then click Run.
3.Type e:\launch.bat where e is the drive letter of the CD or DVD drive.
4.Click OK.
5.Select your language.