If the device icon is still not displayed, check the cable connections and
vThe
Some computers have Compatible and High Performance modes for mass storage devices. Normally, the
Use the following procedure to check the
1.Access your system configuration utility program. Pressing F1 at system startup does this on most Lenovo computers.
2.Select Advanced/IDE Configuration.
3.Scroll down to the SATA#1 Configuration section.
Refer to the documentation that comes with your computer for additional details on selecting IDE performance modes.
vThe disc cannot be read. Take the following actions:
1.The disc might be dirty; clean it as described in “Caring for a CD or DVD” on page
2.The disc might be defective; try another disc.
3.The disc is not
vThere is no sound from the disc.
1.Check that you are not using a data CD.
2.Adjust the
3.Enable digital audio as in Appendix D, “Enabling Digital Audio Extraction,” on page
vUnable to Create Overlay Window message appears when you use WinDVD with Windows 2000.
1.Your video device driver needs an update to enable overlay support. Contact the manufacturer of your video adapter or your computer for updates. Some device drivers are provided on the ThinkCentre
2.The resolution of your screen might be too high. Try setting the resolution to 800 x 600 x 16 bpp at 60 Hz.
vDVD movies do not start automatically when inserted into the
DVDs that contain both programs and DVD Video content will autoplay the program content. To view the video content, start WinDVD manually.
vVideo appears to be choppy or is dropping frames.
1.Ensure that DMA is enabled on for your computer hard disk drive controller.
2.The resolution of your screen might be too high. Try setting the resolution to 800 x 600 x 16 bpp at 60 Hz.
3.If your computer microprocessor has less power than a Pentium II 450 microprocessor, some jerkiness is normal on certain DVDs.
