Item | Description | Default |
|
|
|
User Color | This feature adjusts the color balance in each color of RGB (red, green, | n/a |
| blue) and their neutral colors (cyan, magenta, yellow, white) by using color |
|
| correction adjustment. Increasing a color’s setting heightens the intensity of |
|
| that color on the screen, while a lower setting makes a color less intense. |
|
| Press the up or down cursor button to select a color. Press the left or right |
|
| cursor button to adjust the selected color. Range: 0 - 100 |
|
|
|
|
White Peaking | White Peaking increases the output in the brightest whites without | Data source: 10; |
| changing blacks and grays. It does not seriously obscure white detail. For a | Video source 2 |
| stronger image, adjust toward a stronger setting. Press the left or right |
|
| cursor button to adjust the white peaking value. Range: 0 - 10 |
|
|
|
|
Logo Display | Press the right or left cursor button to enable or disable if the logo displays | On |
| when the projector starts, and when no source is detected. range: On - Off |
|
|
|
|
Auto Keystone | When enabled, the projector automatically corrects any keystone distortion | Off |
| in the image when you press the Auto button (from the remote control or |
|
| the keypad). Press the left or right cursor button to enable or disable Auto |
|
| Keystone. |
|
|
|
|
Auto Keystone | Press Enter to | n/a |
Calibrate |
|
|
|
|
|
Cancel | Cancels changes made in the | n/a |
| parameters to their previous settings. |
|
|
|
|
User color
To access the User color menu,
1.Press the Menu button to open the
2.Press the left or right cursor button to move to the Properties menu.
3.Press the up or down cursor button to move to the Advance Feature menu and then press Enter button.
4.Press the up or down cursor button to move to the User Color menu and then press the Enter button.
