Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
The following illustration shows the correct location of each label.
1 | 2 | 3 | 4 | 5 | 6 | 7 |
14
13
12
8
9
11 10
If the Windows Certificate of Authentication label (COA) 1 is attached to a part that is replaced, return the old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were.
When you replace the base cover, apply the following label:
6
FCC label
The following labels need to be peeled off from the old base cover, and need to be put on the new base cover.
2
3
4
5
7
8
Information label
SYS barcode label
Geo label
PRC label
SIRIM label or Indonesia postel label
Asset tag
9Asset tag
10Non Encryption label
11ECC label
12Indonesia rating label
13Rating label
14Rating label
For some models, you need to apply two FCC labels. Check the old base cover; if it has two FCC labels, apply both to the new base cover.
2010 LCD front bezel
For access, remove these FRUs in order:
•“1010 Battery pack” on page 44
•“1140 LCD unit” on page 62
Chapter 7. Removing and replacing a FRU 67
