Upgrading the hard disk drive
7.Attach the cover to a new hard disk drive.
8.Insert the hard disk drive and its cover into the hard disk drive bay; then firmly install them.
9.Turn the computer over so that its bottom side is up. Reinstall the screw.
10.Reinstall the battery.
11.Turn the computer over again. Connect the ac adapter and the cables to the computer.
Replacing the battery
1.Turn off the computer, or enter hibernation mode. Then disconnect the ac adapter and all cables from the computer.
Note: If you are using a PC Card, the computer might not be able to enter hibernation mode. If this happens, turn off the computer.
2.Close the computer display, and turn the computer over.
3. Slide the battery latch to unlock it | ; then remove the battery | . |
Note: The first position of the battery latch is for releasing the lock of the battery.
34ThinkPad® G40 Series Service and Troubleshooting Guide
