1050 Hard disk drive (HDD) assembly
For access, remove these FRUs in order:
v“1010 Battery pack” on page 80
v“1040 Thermal cover” on page 85
Table13. Removal steps of HDD assembly
1
When installing: Make sure that the HDD connector is attached firmly.
Attention:
vDo not drop the drive or apply any physical shock to it. The drive is
sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
vBefore removing the drive, have the user make a backup copy of all the
information on it if possible.
vNever remove the drive while the computer is operating or is in suspend
mode.
86 ThinkPad SL410, L410, L412, SL510, L510, and L512 HardwareMaintenance Manual