Lenovo manual Numeric error codes continued, ThinkPad SL300 Hardware Maintenance Manual

Table 1. Numeric error codes (continued)

Symptom or error	FRU or action, in sequence
7001	Add the DIMMs.
(HDCP) Memory is not enough for HDCP
Key Provisioning!
7002	System board.
(HDCP) Failed to check the key set
Family-EKS!
7003	System board.
(HDCP) Chip-Unique-EKS re-encryption
failed!
7004	System board.
(HDCP) Failed to check the key set
Chip-Unique-EKS!
7005	System board.
(HDCP) Cipher Initialization with
Chip-Unique-EKS failed!
8100	1.	System board.
Gate20 Error	2.	DIMM.
8101	1.	DIMM.
Multi-Bit ECC Error	2.	System board.
8102	1.	DIMM.
Parity Error	2.	System board.
8103	1.	DIMM.
RAM R/W test failed	2.	System board.
8104	1.	DIMM.
CMOS Memory Size Wrong	2.	System board.
8200	Reseat the boot device. Confirm that boot
Boot Failure ...	image is stored in the failing device.
8201	Confirm that boot image is stored in the
Invalid Boot Diskette	failing diskette.
8202	Confirm that the boot media is installed in
Drive Not Ready	the driver.
8203	Reseat the diskette drive.
A: Drive Error	1.	Diskette drive.
	2.	USB cable (if diskette drive has removal
		USB cable.)
8204	Reseat the diskette drive.
B: Drive Error	1.	Diskette drive.
	2.	USB cable (if diskette drive has removal
		USB cable.)
8205	Reaset the diskette cable. Confirm that
Insert BOOT diskette in A:	boot image is stored in the failing diskette.
8206	Reseat the bootable devices. Confirm that
Reboot and Select proper Boot device or	the bootable device or media is in the
Insert Boot Media in selected Boot device	system.
8207	Reseat the bootable devices. Confirm that
NO ROM BASIC	the bootable device or media is in the
	system.

40ThinkPad SL300 Hardware Maintenance Manual