Lenovo SL300 manual Palm rest, Step Icon Screw quantity Color Torque

1120 Palm rest

For access, remove these FRUs in order:

v“1010 Battery pack” on page 63

v“1030 Hard disk drive (HDD) cover and HDD” on page 65

Note:

In models with the fingerprint reader, the sensor is attached to the palm rest FRU. If the fingerprint reader has any defects, you can replace it by the procedures given in this section, which are the same for a palm rest with or without a fingerprint reader.

Table 24. Removal steps of palm rest

1

1

1

1

Step	Icon	Screw (quantity)	Color	Torque
		M2 × 3 mm, wafer-head,	Black	0.167 Nm
		nylon-coated (2)		(1.7 kgfcm)
		M2 × 5 mm, wafer-head,	Black	0.167 Nm
		nylon-coated (1)		(1.7 kgfcm)

78ThinkPad SL300 Hardware Maintenance Manual