8.4.3 TCP/IP
You can configure the printer server to automatically get IP from DHCP server or manually specify static IP. The printer server also has a
If you need the printer server to automatically get an IP from DHCP server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP)”. You also can select “Disable Use the following TCP/IP Settings” to manually assign “IP Address”, “Subnet Mask” and “Gateway” for the printer server.
You can enable/disable for the printer server’s DHCP server. The DHCP server is disabled by default. If the DHCP Server is enabled, you have to assign a range of IP addresses here. Fill in the “Start IP”, “Range”, “Gateway”, “DNS”, and “Domain””, and the printer server will assign a unique IP for each client.
108
