74
7.12 System Configuration Double Click “System” icon and the System configuration window will
pop-up.
In the System configuration page, you can select to enable/disable
each printing or management protocol, assign name for each printer port
of this printer server, upgrade the new firmware for this printer server,
and enable/disable wireless function. Note: Wireless function available
for WPS-9123 only.
Port Name is the name of the printer port. The Printer server has
three printer ports, two USB 2.0 ports and one parallel port. Each printer
port has to be assigned a name. Then you can use this name to access
the printer port. By default, the printer port name is “p1” for port 1, “p2”
for port 2 and “p3” for port 3.