Services Settings, Dhcp Server | LevelOne WAB-1000 specs

Services Settings

DHCP Server

This page allows configuration of the DHCP server function accessible from the Local LAN port for internal management of the WAB-1000. The default factory setting for the DHCP server function is enabled. You can disable the DHCP server function, if you wish. You can also set the range of addresses to be assigned.

The DHCP server function, accessible only from the LAN port, is used for initial configuration of the management functions.

28

Image 33

LevelOne WAB-1000 manual Services Settings, Dhcp Server

Contents

User Guide Page Table of Contents WPA Encryption Page Introduction Basic Features Wireless Basics Access point configurations Network Configuration802.11b 802.11g Possible AP Topologies Data Encryption and Security Bridging AES-ECB and 3DES for Bridging WPA with TKIP/ AES-CCMP MAC Address Authentication Operator Authentication and ManagementDhcp Server Management Preparation for use Hardware installation Installation Instructions Ensure the cabling is correctly installedMinimum system and component requirements Page Sealing Antenna Connections Indicator LightsLED WAN Introduction Preliminary configuration steps Initial setup using the Local port General System Configuration WAN LAN Wireless Setup Page Dtim RTS Ssid Encryption WPA Encryption Page MAC Address Filtering Bridging and Bridging Encryption Rogue AP Detection Advanced Services Settings Snmp Agent List All Users User Management Add New User Monitoring/Reports Bridging Status System Status Wireless Clients Dhcp Client List Adjacent AP List System Log Web Access Log Network Activity System Administration Firmware UpgradeFactory Default Remote Logging Reboot Utilities General bridge setup Configure the WAB-1000 as a bridgePage Page Point-to-point bridge configuration Set up bridging type Bssid Point-to-point bridging setup guidePage Page Point-to-multipoint bridge configuration Point-to-multipoint bridging setup guide Repeater bridging setup guide Repeater bridge configuration Bridging Encryption Manufacturer’s Statement Radio Frequency Interference RequirementsChannel Separation and Wlan Cards AES 3DES Dhcp SnmpTkip WPA