BSSID | Add Bridge 2's BSSID | Add Bridge 1's and Bridge | Add Bridge 2's BSSID |
|
| 3's BSSID |
|
|
|
|
|
Wireless Configuration – | Select appropriate key | Select appropriate key | Select appropriate key |
Bridging Encryption | type/length and enter key | type/length and enter key | type/length and enter |
| value. Must be the same as | value. Must be the same as | key value. Must be the |
| that on the other 2 Bridges. | that on the other 2 | same as that on the |
|
| Bridges. | other 2 Bridges. |
|
|
|
|
|
|
|
|
With this configuration, each bridge can control a wireless LAN. All wireless clients must have the same SSID as the bridges on the AP card (as set in the Wireless Configuration— General screen. All clients can roam between the three bridges.
All other setup screens should be completed following the guidelines in Chapter 3.
50
