Lexicon DC-1 owner manual Exclusive Zone 2 Control

Installation and

Calibration

	Lexicon
Exclusive Zone 2 Control	The DC-1 can also be used as an exclusive Zone 2 controller, allowing
	remote use of the system while the local room(the room in which the
	DC-1 is located) remains muted. To use the DC-1 in this manner, turn on the
	DC-1 by pressing the RECORD/ZONE 2 key on the remote. The unit will
	power up with the System Mute and Effect Bypass activated. The remote
	will default to Zone 2 IR Remote mode as described above, with Volume,
	Mute, Input Selection and L/R Balance controlling only the Record and
	Zone 2 outputs. To return to normal operation, simply press OFF, then ON.

Digital audio inputs can be selected for the Record/Zone 2 outputs under the following conditions:

•The digital input must be assigned to an input via the Setup: Input Configuration menu.

•The input must have REC/ZONE 2 set to DIGITAL. (TAPE and VCR1 are normally "BLOCKED", but can be changed in the Input Configuration menu.)

•The input must be selected for Main outputs.

20