DC-1Effects
The Party effect allows unprocessed stereo signals to be played over all | Party | ||
speakers for background music or for maximum acoustical output of the |
| ||
system. |
|
|
|
|
|
| Party Parameters |
Parameter | Initial Value | Range | |
HIGH PASS | 40Hz | OFF, |
|
CENTER LEVEL | 15 |
| |
SUBWOOFER LVL | +0dB |
| |
EFFECT LEVEL | +00dB |
| |
CUSTOM |
|
|
|
HIGH PASS sets the level of a filter which removes low frequencies from the center, side, and rear outputs. This is useful if the system is being used at high volumes where low frequencies might damage smaller speakers.
CENTER LEVEL attenuates the level of the center channel as much as 15 dB. A numerical value and horizontal bar are shown by the front panel and on- screen displays during adjustment.
SUBWOOFER LVL boosts or cuts the subwoofer output level. Although the normal subwoofer level is set during the calibration procedure, with some recordings it may be desirable to increase or decrease this deep bass level.
EFFECT LEVEL adjusts the loudness of the center, side and rear speakers.
The Two Channel effect allows you to use your system for two channel stereo playback.
Parameter | Initial Value | Range |
SUBWOOFER LVL | +0dB | |
CUSTOM |
|
|
SUBWOOFER LVL boosts or cuts the subwoofer output level. Although the normal subwoofer level is set during the calibration procedure, with some recordings it may be desirable to increase or decrease this deep bass level.
Two Channel
Two Channel Parameters
57
