Lexmark Setting the outgoing fax name and number, Setting the date and time, Turning daylight saving time on or off

Setting the outgoing fax name and number
To have the designated fax name and fax number printed on outgoing faxes:
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2Click Settings.
3Click Fax Settings.
4Click Analog Fax Setup.
5Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6Click inside the Station Number box, and then enter the printer fax number.
7Click Submit.
Setting the date and time
You can set the date and time so that they are printed on every fax you send. If there is a power failure, you may have
to reset the date and time. To set the date and time:
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2Click Settings.
3Click Set Date and Time.
4Click inside the Set Date & Time box, and then enter the current date and time.
5Click Submit.
Turning daylight saving time on or off
The printer can be set to automatically adjust for daylight saving time:
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2Click Settings.
3Click Set Date and Time.
4In the Daylight Savings box, click on one of the following:
Yes turns daylight saving on.
No turns daylight saving off.
5Click Submit.
Faxing
100