Placing separator sheets between copies
1Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the address
in the TCP/IP section.
2Click Settings.
3Click Copy Settings.
4Click Separator Sheets.
Note: Collation must be On for the separator sheets to be placed between copies. If Collation is Off, then the
separator sheets are added to the end of the print job.
5Select one of the following:
Between pages
Between copies
Between jobs
6Click Submit.
Copying multiple pages onto a single sheet
In order to save paper, you can copy either two or four consecutive pages of a multiple-page document onto a single
sheet of paper.
Notes:
The Paper Size must be set to Letter, Legal, A4, or B5 JIS.
The Copy Size must be set to 100%.
1Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2If you are loading a document into the ADF, then adjust the paper guides.
3From the printer control panel, press the Copy button.
4From the Copy area, press the Options button.
5Press the arrow buttons until Paper Saver appears, and then press .
6Select the output you want.
For example, if you have four portrait-oriented original documents that you want copied to the same side of one
sheet, stop at 4 on 1 Portrait, and then press .
7Press for a black only copy or for a color copy.
8If you placed the document on the scanner glass and have additional pages to copy, then place the next page
on the scanner glass, and then press 1 on the numeric keypad. Otherwise, press 2 on the numeric keypad.
Copying
81