Chapter 5: Printer Options
102
Printer Options
Loading Paper in the Tractor 2 Feeder
The Tractor 2 Feeder has a tractor feeder for continuous forms and
a manual feed tray for single sheets and single-part forms.
This section includes directions for loading both continuous forms
in the Tractor 2 Feeder and single sheet or envelopes in the manual
feed tray.
Loading Continuous Forms in the Tractor 2
Feeder
1Turn the printer On.
2Make sure the paper path is clear. If a single sheet or envelope
is loaded in the printer, remove it.
3Make sure AutoGap is set to On or Single AutoGap. For help,
see “Setting AutoGap” on page 48.
4Make sure the paper select lever is pushed down in the
continuous forms position.
5Notice how the manual feed tray fits onto the Tractor 2 Feeder .
You will need to remember this when you replace the tray
later.