Chapter 4: Selecting and Loading Paper
78
Selecting and Loading Paper
Setting TOF for Single Sheets and Envelopes
TOF can range from minus 2.54 cm (1 in.) to plus 55.88 cm (22 in.)
from the top of cut sheet paper. To set and save TOF:
1Turn the printer On.
2Make sure continuous forms are parked (press Load/Unload.)
The operator panel displays a Paper Empty/Add Paper
message.
3Move the paper select lever up to the single sheets position.
4Load a cut sheet of paper or envelope through the manual
feed.
The printer moves the paper or envelope to the current TOF.
5Press Menu. Set Top Of Form appears.
6Press any paper movement key (Micro ↓, Micro ↑, or
LineFeed) to move the paper or envelope to the appropriate
position.
7Press Store to save the position you want. The Ready light
comes on solid.
When you reload paper at a later time, press Start/Stop. The
paper moves to the TOF.
Setting TOF in a Macro
Each macro has a separate TOF setting. To set TOF in a macro:
1Select the macro you want to use. For help selecting a macro,
see “Setting and Using a Macro” on page 52.
2Set Top of Form. For help, see “Setting TOF for Continuous
Forms” on page 76 or “Setting TOF for Single Sheets and
Envelopes” on page 78.
3Press Store to save the settings in the currently selected macro.