Lexmark 4227 Manual AutoGap (AutoGap Set to Off)

49
Chapter 3: Using the Operator Panel
Using the Operator Panel
Manual AutoGap (AutoGap Set to Off)
When AutoGap is Off, you can manually adjust the gap position between
the printhead and the paper. To manually set AutoGap, press:
1Menu.
2Item ↓ until AutoGap appears.
3Next →.
4Item ↓ or Item ↑ until Off appears.
5Store.
6Next →.
7Item ↓ or Item ↑ to select the manual position you want.
8Store to save the setting.
9Quit to exit the function menu.
The following table gives the manual setting choices and the information
needed to make the appropriate choice for your paper type.